Remove Paper From Staple Tray Ricoh. The following example explains the removing procedure for the stand
The following example explains the removing procedure for the standard paper tray (Tray 1). Remove any stuck paper gently to avoid damaging the Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or pushing in the finisher's staple unit. Paper size and type are mismatched. • 2: Remove the cartridge. If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge. 82K subscribers Subscribed This video will walk you through step-by-step instructions detailing how to change the staple cartridge on a Ricoh/Savin copier when the machine indicates re Sorts, stacks, and staples multiple sheets of paper. Also for: Sr3280. We walk through the common areas where #ricoh printers can experience a Paper jam. Manual Ricoh MP C2003SP. Open the output ramp, and then remove the jammed paper. The staple cartridge is not set correctly. The same procedure applies to remove jammed paper from Tray 2. • Remove the misfed paper. • Remove misfed paper. If there is dust or grime inside the device, wipe with a clean, dry cloth. If the jammed paper cannot be removed 3 Remove the jammed paper by gently pulling it straight out. • 6: Close the side cover. • 4: Remove the jammed staples. Select another tray from the following and press [Continue]. Booklet Finisher. When the 500 View and Download Ricoh SR3290 field service manual online. Did you use force to pull out the jammed document? Do not use force to pull out the jammed document, and remove it by referring to the following video. Disconnect the plug from the wall outlet at least once a year. To remove paper that has not been fed into the fixing section correctly, remove the jammed paper through the underside of the fusing unit. This symbol indicates points that may result in the product or service becoming unusable or result in the loss of data if the instructions are not . • Check • 1: Open the side cover. ) Transport damage. Does this have an exit arm on it? 2. 1. Open the Paper Trays Pull out Tray 1 and Tray 2 (if installed). SR3290 finishers pdf manual download. Consists of the following paper trays: Finisher If "Staple:" is grayed out and Cannot be specified in Printing preferences, you need to enable [Enable bidirectional support] and [Automatically Update Printer Information] in "Printer Properties" of the When removing the paper delivered to the shift tray, if you remove the paper at an angle or towards the front of the machine, the shift tray may rise and catch on the paper. Learn how to clear a paper jam on your Ricoh multifunction device. Paper size Indicates points to pay attention to when using functions. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. 138 6 Removing Jammed Staples Note Curled paper may cause staples to jam. Clean away any dust and grime from the plug and outlet before Ricoh OfficialIf the alert indicator lights up continuously or flashes, press the [Info] icon on the Home screen and check the displayed message. For details about removing jammed paper, see "Removing Jammed Paper", Troubleshooting. There's a sensor out of position somewhere. Pro C5300S printer pdf manual download. View the Ricoh MP C2003SP manual for free or ask your question to other Ricoh MP C2003SP owners. View and Download Ricoh Pro C5300S operator's manual online. To cancel job, press [Job Reset]. If the paper is stuck, gently wiggle it back and Cause Solution The tray's side or end fences may not be set properly. How to remove jammed paper from the standard or bypass tray リコー公式チャンネル RICOH CHANNEL 7. If there is no improvement, change to a stiffer copy paper. ⚠️ Important Tips: Never pull paper out When the paper is not delivered and the message is displayed, follow the instructions on the display to remove the paper. When the finisher is installed, after removing jammed staples, staples will not be ejected the first few times you try to use the stapler. Paper in staple tray. Remove Paper: Carefully grasp the stack of paper in the upper tray and lift it straight up to remove it. Re: MP5002 with remove paper from staple tray message. We would like to show you a description here but the site won’t allow us. Pull tray 1 Check the Bypass Tray (if in use) If you were printing from the bypass tray, lift the flap and check for jams there too. Also for: Pro c5310s. Open cover and remove paper. • 3: Open the face plate. Learn mo To avoid this, turn paper over in the tray. I'd go one of two ways. • 5: Reinstall the cartridge. Check inside the paper feed area for jams. If you cannot remove the jammed paper or it is difficult to remove, the paper may be jammed inside the device. To avoid this, turn copy paper over in the tray. You can trap and injure your fingers if you do not. ) procedure below to remove it. • Do not place anything on the finisher tray.